Motec M800 Engine Management System (ECU)
The M800 offers the next generation in Engine Management Systems. This system has been developed through rigorous research and practical field-testing. The M800 retains all the best features of our previous ECU's, while offering a combination of unsurpassed power and flexibility.
Features
Capabilities
The M800 and the M880 series of ECU's feature capabilities to run a variety of different engines up to 12 cylinders. If you are using a 3 rotor rotary engines the M800 is the ECU for you. The M800 can control up to 8 high flow injectors or 12 low flow injectors in Sequential Mode. With expanded functionality over the M4 and M48 the M800 offers the ultimate in engine controllability. The M800 is CAN capable which means it can send data over a CAN bus to our ADL Dash or other CAN enabled device. It has the capacity to read two 5-wire Wide Band Lambda sensors for Bank to Bank feedback control. It is compact and lightweight, only 500 grams. Features upgraded microprocessor and memory which accelerates overall speed. The M800/880 ECUs feature MoTeC's heralded Windows based ECU Manager which allows the user to define custom display templates depending on what type of tuning he is engaged in. M800/880 were some of the first ECUs in the industry to offer drive by wire control capability as well as fully variable camshaft timing control for as many as 4 camshafts per engine.
Faster Processing
A new generation time co-processor enhances control of Fuel and Ignition. Leading edge processor means data can be logged at up to 200 samples per second.
Digital Triggering
M800's digital triggering system is customizable and programmable to suit any engine and includes sophisticated diagnostics that monitor the quality of trigger signals. Programmable filter characteristics allow the noise filter characteristics to be adjusted to suit the sensor system which gives improved noise rejection. This ensures the integrity of the trigger signals even in the most noisy environments.The DTS continuously monitors the quality of the trigger sensor signals and will give a warning if the quality of the signal is poor allowing trigger system problems to be rectified before they cause an operational problem.
Compatibility
The M800 talks to most existing sensors within your vehicle, saving costly additions of new sensors.
|
